The Proxmark 3 Field Enhancers are just the edge your Proxmark 3 Easy needs!
We love our PM3 Easy's but we wish it had that extra "Umpf" just a bit more "Pizazz!"
Our field enhancers pair our FR4 Repeaters with two easy to install options for the Proxmark 3 Easy. Both of our Field Enahancers have two different silkscreening options to choose from. One specific to Biohackers sporting subdermal implants. Another more plain. These are reversable so pick what you please to display!
What exactly are the two different form factors?
Back Plane Field Enhancers
Imagine these like adding a bit more junk in the PM3 Easy's Trunk. You add these to the bottom of the PM3 Easy with the 4 included Screw posts and it just works! See increased range and readibility in minutes of time!
Midboard Field Enhancers
These Replace your entire mid-board of the PM3 Easy. Installation is slightly more involved.
- Remove the LF antenna on top with 4 screws.
- Remove the 4 Posts that the LF antenna rested on
- Remove the remaining 2 lower screws of the midboard.
- Fling your old useless midboard across the room for distance
- Add the new MWG Midboard in place with your favored silkscreen design facing up.
- Replace the two lower screws
- Replace the 4 upper posts
- Replace the LF Antenna with 4 screws careful to note the arrows on the antenna screw posts pointing to the lower 2 posts.
- Rejoice
Full Build Guides Available Here
Midboard STL
To ensure your Midboard fits correctly you can use this STL, print it and match it to your current midboard: 3d Printer STL
Incompatible Proxmark 3 Easy Identifier
There are a handful of Proxmark 3 Easy's in the wild that are incompatible with both the Midboard and Backplane boards. The best way to identify it is by looking at the right side of the Mid-board on the stock PM3. If the text that says "Power" is Above the right most screw post hole, it is NOT compatible. Refer to the wonderfully photoshopped picture to ensure you have the proper variant.
Proxmark 3 Easy Field Enhancers
The Proxmark 3 Easy comes in many different flavors. Currently the Backplane Board supports all the current known PM3 Easy variants.
However the Midboard will only work on standard Proxmark 3 Easy's and will NOT fit on the following:
Proxmark 3x (The circuitry for the Bluetooth controller, charge controller for the battery, and Midboard HW switch for ID clone are all on the stock midboard and it cannot be removed.
Reviews
Before I installed the midplane (and backplane, tried both). I could not for the life of me get a read no matter how I oriented my ProxMark 3 Easy.
After I swapped to the midplane, I did a quick "hf tune" to see where to hold it for a spike, (this did not help with a stock PM3), and after positioning, I got a perfect read.
I have been playing around with it and I have been able to get a perfect read within 2 tries even haphazardly! Honestly Amazing work done here, and it works flawlessly!