13.56mhz Field Meters Now Available!

After about 3 months of research and looking at the best possible way of doing something like this we are happy to announce we have a viable way to measure High Frequency 13.56mhz fields. These tuned devices should be able to pick up the standing field of most NFC readers. The caveat is fields that are pulsing (like phones and battery powered readers) these pulse fields are not active long enough to trigger a reading on the display. You should be able to place a credential between the field and meter to activate the long read of the field and the meter will then be able to read it. Or use an app like NFC tools or Zinc to read the standing field on your phone. These devices feature a tuned coil pcb antenna and a tuned voltmeter. The LED 7-Segment display will show 1/10 vm of the field generated. Multiply the displayed value by 10 to see the V/M of the field. On DangerousThings forum this has been abreviated to 1mH (megaHammy)= 1/10Vm At current we will do our best to accomodate color choices (Red, Green, Blue, Orange) however they are currently limited and will either be reduced to Red only, or be random. Case designs are currently in the works, and will be released on the product page. The PCB comes in at just around .8mm with the overall thickness with Battery and LCD and button at 9.88mm.

Meters require a CR2032 to operate which is not included due to Shipping regulations.